Meisei has achieved and continues to hold a share of more than 80% for viscosity controllers in the Japanese market as a specialized manufacturer
following the launch of the viscosity controller in 1987. The controller is extensively used in photogravureand flexographic printing, dry lamination, coating, marking, and painting industries.
Can control the viscosity of all kinds of liquids for volumes ranging from 200 cc to 200 ℓ, and viscosity ranging from 5 CPS to 10,000 CPS. Meisei has
a total of 81 types of viscosity controllers to support a wide variety of liquids.
Benefits of viscosity control
This is an introduction to the advantages of using MS viscosity controller to manage viscosity.
Reduction in printing and paint blemish.
Helps to prevent defects in printing and enhances quality and productivity.
Economizes usage charges of ink and painting material
Ink is diluted to an appropriate level to achieve optimum use of ink.
Reduces labor cost and increases efficiency
A single unit of MS viscosity controller can carry out circulation, stirring, viscosity control, and solvent supply reducing the operator burden and
lesser number of operators are required for the processes.
Usage purpose and solution
(1) Gravure and flexographic printing
Packaging films of food products such as noodles, sweets, and buns, containers, paper bags, cardboard sheets, and building materials
(2) Binding and adhesion: Packing paper of food items
Packing paper of retorts and anti-vibration rubber
Paper varnish, prepaid cards, negative film, polarized film, and automobile interiors
Electric cables, hoses, belts, tablets, plastic containers, and pipes
(5) Screen printing
Electronic and electrical components, bottles, and instrument panels
(6) Painting and others
Exterior panels of consumer electronics, colored plates, office equipment, head lamps, rubber seals, lightning arrester, tube containers, photosensitive
resin plates, color vests, prefabricated panels for outer wall, and wooden panels
The MS viscosity controller works by decreasing the pulsating rate of the pump when the liquid viscosity increases, and increasing the pulsating rate
when viscosity decreases.
New features of VG model !!
(1) Stainless steel box
Easy to clean panels
(2) Dedicated door for pump chamber
Electrical chamber prevents sudden burst of internal pressure during maintenance
(3) Upper tray model
Prevents solvent from entering into the electric chamber when the solvent is supplied from the top.
(4) Exhaust cleaner
Complete recovery of the lubricating oil enabling achievement of clean electric chamber and reduction in the running noise.
(5) Digital pressure switch
Accuracy of the viscosity controller increases and reduces the running noise.
(6) Interlocking of air supply with power ON
Prevents operation of pump when the liquid is not supplied
(7) Common box
Shorter delivery times as the same box is used for models VG-10, VG-15, and VG-20.
(8) Equipment requires less space
Models VG-10, VG-15 and VG-20 are of the same size (excluding projections)
(9) Removable rear panels provided for the pump chamber
This simplifies pump maintenance
(10) Easy installation and removal of pump
Butterfly nut is used for the installation of diaphragm pump